Front axle - corrosion - Page 2

Nigel Booker · 04-Jun-2003, 22:21

When I suggested replating I assumed that the original finish on the front axle would need to be stripped. The plating company would not plate over the existing finish, but would need to take a measurement of the original size to calculate the dip time for the new finish.
The longer you leave a component in the tank the deeper the finish.

The company I work for sends all its brass components away for dull chrome plating and all steel parts for cad plating, and in some cases this involves stripping off the original coating, so I know it can be done.

nelly · 04-Jun-2003, 22:54

New axles are £35.
I was surprised to be honest. Expected more.
Still expensive if they corrode at the first sign of fresh air though!!

Jasper · 05-Jun-2003, 00:44

Jon,i'm struggling to read the posts!They boune better than rattlers SPS!!!

pguenet · 05-Jun-2003, 09:25

check those guys out. They do one in Titane.

http://www.sir-corse.de/poggipollini_shop.htm

well pick-up your German's translator before you get there though. Cannot work out which one in the axle. Doesn't look cheap though!!

antonye · 05-Jun-2003, 11:48

The front axle is the second item in the list "748-998 Steckachse inkl. Mutter" which is the axle plus the matching nut at Euro 539,40 or roughly £340-360 quid (depending on exchange rate).

Talking of plating, if you're interested in doing it yourself you can buy some pretty cheap kits for both CopyChrome and Anodising from http://www.speed-demon.supanet.com/ (starting at 75 quid!)

[Edited on 5-6-2003 by antonye]

Nigel C · 05-Jun-2003, 22:41

Crikey

you might as well buy a bog standard one for £35 and replace it when it corrodes it'd be cheaper !!!!

DJ Tera · 05-Jun-2003, 23:32

Get an original one titanium nitrided, it reduces friction and resists corrosion.

BTW one of my mates works for a design/engineering firm in leicester, and has access to a multi-million pound CNC machine if you want to make a replacement, only thing to pay for is material costs. Another mate has access to a 3d laser scanner, so things could get quite interesting... was thinking of making some custom rearsets and perhaps a bottom yoke from billet aluminium

[Edited on 5-6-2003 by DJTera]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

04-Jun-2003, 22:54	#12
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) New axles are £35. I was surprised to be honest. Expected more. Still expensive if they corrode at the first sign of fresh air though!! Reply

05-Jun-2003, 00:44	#13
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Jon,i'm struggling to read the posts!They boune better than rattlers SPS!!! Reply

05-Jun-2003, 09:25	#14
pguenet Registered Forum User Big Twin Posts: 1,413 Join Date: Aug 2002 Location: Surrey check those guys out. They do one in Titane. http://www.sir-corse.de/poggipollini_shop.htm well pick-up your German's translator before you get there though. Cannot work out which one in the axle. Doesn't look cheap though!! Reply

05-Jun-2003, 22:41	#16
Nigel C Registered Forum User Big Twin Posts: 1,710 Join Date: Aug 2002 Location: Worthing Sussex Mood: happy bike passed MOT Crikey you might as well buy a bog standard one for £35 and replace it when it corrodes it'd be cheaper !!!! Reply