Help Needed to Find 1000ss Headers

antonye · 09-Mar-2009, 13:11

Jason, get in touch with Mark (mjbayley) as I know he has a 2-into-1 Termi system from a 1000 Sport that might fit the bill? He was going to use it for a race bike but it didn't fit the engine he now has so he might part with it for some cash, or even to borrow.

phillc · 09-Mar-2009, 13:28

Quote:

Originally Posted by antonye

... he has a 2-into-1 Termi system from a 1000 Sport that might fit the bill?

Unfortunately these headers won't fit with a Supersport frame/swingarm/shock arrangement.

There was a couple of these on eBay too, but the answer from the experts was "No".

Thanks though.

skidlids · 09-Mar-2009, 13:44

The headers I have are like these, i'll check the part numbers when I get home they should be
571.1.081.1A
570.1.084.1A

for a 2005 & 2006 1000SS/1000DS

skidlids · 09-Mar-2009, 19:54

Just checked and the part numbers correspond, although thefeed into the collector box for the rear header pipe is at a different angle to the pic.
The pic from the 1000DS Supersport parts PDF is probably updated from a generic pic

phillc · 09-Mar-2009, 22:23

Thanks Skids. It's almost certain these are the right ones then, and certainly the best chance we have.

ENGAKATS · 10-Mar-2009, 00:48

Quote:

Originally Posted by skidlids

The pic from the 1000DS Supersport parts PDF is probably updated from a generic pic

indeed!!

Iconic944ss · 10-Mar-2009, 02:00

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

skidlids · 10-Mar-2009, 02:33

Thats not bad value, my race CBR600 and two of my race Fireblades had full Akropovic (well OK one was a Skorpion before they changed the name) and they were around a Grand 9 years ago

phillc · 10-Mar-2009, 08:31

Quote:

Originally Posted by Iconic944ss

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

Nice, but I think this only fits the Monster 1000 and not the Supersport 1000.

ENGAKATS · 10-Mar-2009, 14:02

Quote:

Originally Posted by Iconic944ss

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

It's the first time I see a complete system for the SS1000 (although those headers look like they fit on a watercooled 4v engine).

Silmoto makes the "spaghetti headers" but for only for the Monster 1000 (not the same headers with the SS1000,

) and for the 750-800-900 SS.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

09-Mar-2009, 19:54	#4
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Just checked and the part numbers correspond, although thefeed into the collector box for the rear header pipe is at a different angle to the pic. The pic from the 1000DS Supersport parts PDF is probably updated from a generic pic Checkout the Desmo Due Paddock on Facebook Reply

09-Mar-2009, 22:23	#5
phillc Registered Forum User Big Twin Bikes: 996 race bike Posts: 1,957 Join Date: Apr 2003 Location: Twickenham, London Mood: Almost over it. Thanks Skids. It's almost certain these are the right ones then, and certainly the best chance we have. Reply

10-Mar-2009, 02:00	#7
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,796 Join Date: Oct 2002 Location: north east or..... For those with DEEP pockets: https://www.oncycles.com/catalog.asp...s&product=8205 Reply

10-Mar-2009, 02:33	#8
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Thats not bad value, my race CBR600 and two of my race Fireblades had full Akropovic (well OK one was a Skorpion before they changed the name) and they were around a Grand 9 years ago Checkout the Desmo Due Paddock on Facebook Reply