Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > Help Needed to Find 1000ss Headers

[phillc]

Originally Posted by antonye

... he has a 2-into-1 Termi system from a 1000 Sport that might fit the bill?

Unfortunately these headers won't fit with a Supersport frame/swingarm/shock arrangement.

There was a couple of these on eBay too, but the answer from the experts was "No".

Thanks though.

[skidlids]

The headers I have are like these, i'll check the part numbers when I get home they should be
571.1.081.1A
570.1.084.1A

for a 2005 & 2006 1000SS/1000DS

[skidlids]

Just checked and the part numbers correspond, although thefeed into the collector box for the rear header pipe is at a different angle to the pic.
The pic from the 1000DS Supersport parts PDF is probably updated from a generic pic

[phillc]

Thanks Skids. It's almost certain these are the right ones then, and certainly the best chance we have.

[ENGAKATS]

Originally Posted by skidlids

The pic from the 1000DS Supersport parts PDF is probably updated from a generic pic

indeed!!

[Iconic944ss]

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

[skidlids]

Thats not bad value, my race CBR600 and two of my race Fireblades had full Akropovic (well OK one was a Skorpion before they changed the name) and they were around a Grand 9 years ago

[phillc]

Originally Posted by Iconic944ss

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

Nice, but I think this only fits the Monster 1000 and not the Supersport 1000.

[ENGAKATS]

Originally Posted by Iconic944ss

or.....

For those with DEEP pockets:

https://www.oncycles.com/catalog.asp...s&product=8205

It's the first time I see a complete system for the SS1000 (although those headers look like they fit on a watercooled 4v engine).

Silmoto makes the "spaghetti headers" but for only for the Monster 1000 (not the same headers with the SS1000, ) and for the 750-800-900 SS.

[phillc]

Originally Posted by ENGAKATS

It's the first time I see a complete system for the SS1000 (although those headers look like they fit on a watercooled 4v engine).

Silmoto makes the "spaghetti headers" but for only for the Monster 1000 (not the same headers with the SS1000, ) and for the 750-800-900 SS.

But is that Akrapovic system for the SS1000? The description is "Akrapovic Evolution Open Exhaust System For Ducati Monster 1000" ?

I agree it's a shame that the Sil Moto spaghetti headers aren't available for this bike either.