Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 748R Rough Running at Low Revs - What Chip is This?

[zhed44]

Thanks for the replies everyone, they've been really helpful.

Looks like "FIM chip" is going to be added to the ever expanding "To Do" list then....

Originally Posted by Gaz 748

I have an FIM Ultimap chip.... Pro Twins in Godstone sell them.

Are they 'plug and play', or do they need to be set up by a professional? My ex-996S came with an FIM already installed, so I don't know anything about the fitting process.

[Gaz 748]

Just plug in and play, i would say they are 95% ready to go, you can set them
up on a dyno if you want it spot on. Moto Rapido can do this for you. Its just an eprom, remove old one and fit new one, make sure its in the right way around,there is a cutout on one side, just change it like for like.

[zhed44]

Originally Posted by Gaz 748

Just plug in and play, i would say they are 95% ready to go, you can set them
up on a dyno if you want it spot on. Moto Rapido can do this for you. Its just an eprom, remove old one and fit new one, make sure its in the right way around,there is a cutout on one side, just change it like for like.

Thanks Gaz. Much appreciated

[zhed44]

It looks like I may have the wrong brain installled (story of my life).

The same chip as mine is on eBay advertised as "748R chip for 45mm road cans"

http://cgi.ebay.co.uk/Ducati-748R-St...3A1%7C294%3A50


The same seller also has a chip for "748R 50mm race cans", so subject to clarification that this is suitable for a 50mm half-system, as it's a lot cheaper than a FIM chip, I may give it a go.

http://cgi.ebay.co.uk/Ducati-748R-Pe...3A1%7C294%3A50

Any thoughts?

[Gaz 748]

If its cheap, go for it. I know the FIM chips are expensive, but i think the best.

p.s. i get 140 miles before the fuel light comes on.

[zhed44]

After exchanging emails with Neil from Cornerspeed, who informed me Ultimap have ceased trading and that he can't get hold of them, I've just managed to buy one of the last remaining Ultimap chips from Sigma.

I'll post an update when it's fitted.

Thanks again for the advice everyone.

[748adam]

soory for the hijack but i have a Ultimap chip for sale, brand new never opened, originally for a 748sp but i believe can be flashed to suit any bike?? i maybe wrong,

im open to offers for it

Adam