Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 1198 / 1098 / 848 > rearset parts - longer toe part or gear change bar

[bradders]

thanks, pm replied Ant elsewhere.

Chris, if I cant get one I'll try that, thanks. Not sure how anyone with size 10 and below is meant to use them tho!! I have them max low and forward and still struggle!!

[antonye]

When sorting out our stuff, I've noticed that there are large discrepancies in the offset sizes between different makes of footpegs.
It's basically down to cost, as to do the offset machining takes longer (to trim it down) and uses more material so therefore costs more if you offset the peg further.
The race gear levers that we sell are 110mm centre-to-centre. If you're using a road setup then you might be stuck if they're not DP copies with what you can replace your existing gear lever with.
But anyway, I'm sure I can sort out some longer toe pegs so it shouldn't be a problem!

[bradders]

ok, let me take a pic and do some measuring tomorrow and I'll stick em up here.

Cheers, getting used to race pattern now so be a shame if I have to go back!

[chris.p]

Not the best of pics, but then my name is not Guy Cope


Chris