Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 16-Sep-2009, 18:53
Dougie748's Avatar
Dougie748 Dougie748 is offline
Registered Forum User
Bevel Head
 
Posts: 94
Join Date: Oct 2008
Mood: Alway's smiling when on my Duke
Hi Antonye yes got the instructions thanks. Spoke to a rep at Meta and he said it sounds like the alarm fuse has blown.
I have checked high and low and am unable to find the fuse line anywhere.
Anyone know where it might be hiding.

Last edited by Dougie748 : 16-Sep-2009 at 19:17.
Quote+Reply
  #2  
Old 16-Sep-2009, 20:08
antonye's Avatar
DSC Member antonye antonye is offline
Administrator
Webteam
MotoGP God
Bikes: 748S, HM1100S, V4SP, Was: DD-A #111
 
Posts: 13,082
Join Date: Feb 2002
Mood: Passion Killer
That's a tough one as the alarms are fitted with all black wires that are labelled before installation, then the labels removed after to make it harder for thieves to hot-wire the bike!
The installer could have routed the wires anywhere (again to make it harder to hot-wire) so it will be a case of tracing back each wire and finding out where it goes.
I presume you have found the unit itself? Mine was fitted in a gap in the frame just above the battery, but obviously yours could be anywhere. Be prepared for a couple of hours of head-scratching and fairing removal!!
Good luck!


I'd rather die peacefully in my sleep like my Grandfather,
than screaming in terror like his passengers.- Jim Harkins

Ducati 748S | Ducati Hypermotard 1100S | Ducati Panigale V4 SP #876 | 600-620SS DesmoDue Racebike #111 <-- Sold!!
Quote+Reply
  #3  
Old 16-Sep-2009, 20:22
NBs996's Avatar
NBs996 NBs996 is offline
Registered Forum User
Ducati in my Blood
 
Posts: 4,728
Join Date: Sep 2003
Mood: I love my 996 xxx
Just to upset you a bit more Dougie... you know that alarm has TWO fuses?!!

One will (should) be on the wire taking a direct feed from the +ve on the bikes battery to the alarm unit, probably in a cylinder type connector. The other one, I've no idea.
Quote+Reply
  #4  
Old 16-Sep-2009, 21:53
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
The Meta on my 999 has the constant +ve feed taken from the ignition switch wiring. There is a small fuse holder in series with this wire. The 10 amp fuse is about half the size of a normal automotive fuse so the fuse holder is quite small. Find where they have tapped into the constant feed and you should find the fuse holder.
Quote+Reply
  #5  
Old 16-Sep-2009, 23:06
Dougie748's Avatar
Dougie748 Dougie748 is offline
Registered Forum User
Bevel Head
 
Posts: 94
Join Date: Oct 2008
Mood: Alway's smiling when on my Duke
Hi Chris thanks for your reply. I have just spent the last 3 hours looking for the fuse with no joy. I have even started to take the tape off the wiring loom as I was told it could be taped over. What a nightmare as I just dont know where to look now.
Maybe tomorrow i will go out to the garage and find it .
Quote+Reply
  #6  
Old 17-Sep-2009, 11:46
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
The fuse holders for some alarm systems come separate and have to be soldered onto the wiring. Just a thought, is there actually a fuse fitted? Was the fitter too lazy to fit it?
Quote+Reply
  #7  
Old 17-Sep-2009, 22:16
Dougie748's Avatar
Dougie748 Dougie748 is offline
Registered Forum User
Bevel Head
 
Posts: 94
Join Date: Oct 2008
Mood: Alway's smiling when on my Duke
Just to update all. The fuse was the one on the bike for the fan....no wonder a couldntfind it. Anyway the alarm was goosed so I had it removed. So am back on the road.

Thanks again all for your help.

Take care and ride safe
Doug
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 20:48.