998/998s/998r Ecu Wiring pin outs

skidlids · 24-Nov-2009, 01:24

Quote:

Originally Posted by antonye

A good tip for removing pins is to get a plastic or metal tube that will just slide over the pin. Push this over the pin to remove and it will close the tabs in and you can remove it from the other side. A little bit of jiggling on the wire helps too!

I usually use a tool akin to the one below for extracting pins, like the ones found in the circular connectors used on 748s to 998s for connecting the front loom, not to dissimilar to the Amphenol ones on our Turbo Molecular Vac pumps at work

ducasa-it · 03-Dec-2009, 13:13

Quote:

Originally Posted by skidlids

I usually use a tool akin to the one below for extracting pins, like the ones found in the circular connectors used on 748s to 998s for connecting the front loom, not to dissimilar to the Amphenol ones on our Turbo Molecular Vac pumps at work

Where can I get one of these tools Skidlids?

skidlids · 03-Dec-2009, 13:19

http://uk.rs-online.com/web/search/s...94955840&Nty=1

also

http://www.amazon.com/Waldom-Extract...ref=pd_sim_t_1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

03-Dec-2009, 13:19	#3
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club http://uk.rs-online.com/web/search/s...94955840&Nty=1 also http://www.amazon.com/Waldom-Extract...ref=pd_sim_t_1 Checkout the Desmo Due Paddock on Facebook Last edited by skidlids : 03-Dec-2009 at 13:34. Reply