Quote:
| Originally Posted by antonye I think I still have the original M8 bolts kicking around here that can be used for measurements - ! |
where are they from then,
Standard 600SS dront engine mounts are M10 X 1.5mm
and about 50mm long, for Kev's I made a pair of Alloy bobbins that would sit in the frame recess and also into the bobbins recess and botled it altogether with a 100mm long Allen bolt and large washer, leaving the crash bobbin free to rotate while having a solid mount from bolt head to the thread in the crankcases.
Checkout the Desmo Due Paddock on Facebook 
skidlids
Threaded Mode