Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Help with more comfort for a taller rider.

[bradders]

A corse racing screen is good, about £35 off ebay, and I had the cyclecat adjustable bar risers and they made a huge difference, but I aint of 6'

[Cranker V2]

Corse screen makes sense, not sure rearsets will improve> Back and up is the norm with rearsets. Also be aware thet bar risers may cause bar/clutch/brake/ lever interference with upper fairing,

[chris.p]

One thing that is easy to do is to move the brake & clutch levers into a more downward angle onthe bars, you need to remove or cut off the pins that lock them into the position that they are in, then turn them around the bars a bit till they are at a more confertable angle for your wrists before tightening them back up.

I have done this on both of the 748's I have had, it makes town riding less of an ache on the wrists.


Chris

[r15suk]

Thanks for the advice. I'll check out the screen and try adjusting the control levers first before looking at bar risers.

cheers
Simon

[Cobbett]

Might some kind soul post a link to a corse screen? I'm considering the same option but ain't exactly sure what I'm looking for.

[Iconic944ss]

Check out - Laminar Lip

[skidlids]

Fast By Ferracci Handle Bar clamps have less of an angle which may help with bar position
Rearsets with the two mounting points and the pegs on eccentric cams should give more leg room, although I have known someone to fit footrest risers for the standard pegs the wrong way so that they lowered the pegs, that gave them more leg room.

Not sure if Wulfie has any mods as he's a tall guy, makes his 748 look like a mini-moto
James (aka 007) is also tall and seems to get on well with his 996, not sure what mods he has made if any