Ducati Sporting Club UK > For Sale / Wanted > Private Adverts > Wanted - DDS Diagnotsic Lead info

[Iconic944ss]

Dunno if this is the same gear Kev, but oddly I only ended up on this thread last nite:

http://www.ducati-upnorth.com/forum/...read.php?15209

[skidlids]

Thanks for your input Frank but I need the Leads for the official Ducati Diagnostic system the DDS that replaced the Mathesis.
Once I have the info I need I can then see how to adapt the leads from my Mathesis to the DDS.

[chrisw]

For your info the centre pin of the 3 way superseal connector is -ve ground and the outer pin is the KKL (the third pin is not connected to anything).

Don't have any experience of the DDS.

[skidlids]

Originally Posted by chrisw

For your info the centre pin of the 3 way superseal connector is -ve ground and the outer pin is the KKL (the third pin is not connected to anything).

Don't have any experience of the DDS.

Thats the eady bit Chris, even for the later bikes just pull it off the Bike wiring diagrams, its a bit harder when you get to the other end with 26 pins to choose from.
I'll probably end up taking it apart and seeing which pins are used, working out the Earth (Ov) pin shouldn't be to hard.
And if all else fails I'll try buying a lead for a Tecnomotor Socio 700, but that would cost about 6 times what I can make a lead up for

[chrisw]

On the EOBD 16 pin connectors these are the only pins used

Pin4 - -ve grnd power supply
Pin5 - -ve grnd on 3 way superseal connector
Pin7 - KKL on 3 way superseal connector
Pin16 - +12v power supply



Don't know if that will help when you have 26 pins!