Exhausts Fabricaters

Cranker V2 · 16-Dec-2011, 09:51

How much was that Bradders?

Jolley · 16-Dec-2011, 10:23

I think he charges about £250, depending on what you want/already have.

Cranker V2 · 16-Dec-2011, 13:20

Cheers Ron,

maybe I will go down that route.

bally71 · 18-Dec-2011, 14:57

What size end cans did you use guys??

I've got a pair of 916 50mm Termis I was hopefully going to use.

I did think I'd need the pair???

How does That work then??

Does it boost midrange / sacrifice top end with a 2 into 1?

bradders · 18-Dec-2011, 16:46

research says to me 2:1 boosts mid range and reduces top end a little

Hugh had twin 916 cans in his 583, but think the single can fits neater into the frame on an SS. Wont fit the same on a 620 monster; absolutely no room at all for the up pipe to get to the end can unless you go round the outside of the swingarm

bally71 · 18-Dec-2011, 20:09

It's for a 620 and it's going in an SS frame ..

be interesting to see what the numbers come out like on the dyno

bradders · 18-Dec-2011, 22:02

mine was dynoed just before I bought it, so when ot comes back post Xmas after a service and spruce up, its going back on for the PC to be set up so we'll see what difference its made overall

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

16-Dec-2011, 09:51	#1
Cranker V2 Registered Forum User 500SD Bikes: Class A 620ssie #71 - 853 R/RS Dry - 748sp Wet Posts: 725 Join Date: Nov 2009 Location: Chester Mood: Green with envy How much was that Bradders? Reply

16-Dec-2011, 10:23	#2
Jolley Registered Forum User Big Twin Bikes: 959 Posts: 1,134 Join Date: Nov 2008 Location: Surrey/Northants I think he charges about £250, depending on what you want/already have. Reply

16-Dec-2011, 13:20	#3
Cranker V2 Registered Forum User 500SD Bikes: Class A 620ssie #71 - 853 R/RS Dry - 748sp Wet Posts: 725 Join Date: Nov 2009 Location: Chester Mood: Green with envy Cheers Ron, maybe I will go down that route. Reply

18-Dec-2011, 20:09	#6
bally71 DSC Club Member Mille Bikes: 620SS Desmo Due 800SS Minitwin 1000SS Monster 750 Posts: 391 Join Date: Apr 2008 Location: Wirral Mood: Inquisitive cat It's for a 620 and it's going in an SS frame .. be interesting to see what the numbers come out like on the dyno Reply

18-Dec-2011, 22:02	#7
bradders Registered Forum User MotoGP God Bikes: 848, M620 DD bike Posts: 11,913 Join Date: Aug 2003 Location: Hants Mood: waiting... mine was dynoed just before I bought it, so when ot comes back post Xmas after a service and spruce up, its going back on for the PC to be set up so we'll see what difference its made overall Reply