Registered Forum User
Bikes: 999s and 955i Daytona
Posts: 17
Join Date: Feb 2013
Location: Bedford uk
Ive just purchased a set of sure flex clutch plates(existing plates were blue from heat but not below wear limits ) ,and they have the dished release plate that i presume goes to the back of the plate stack (first plate to go in when reassembling ), the puzzling thing is when i stripped my clutch there wasnt 1 in there , so should there be ?
Also when measuring the plate stack to achieve the 38mm hieght , does that include the dished plate ?
Any advice appreciated .
Threaded Mode