Ducati Sporting Club UK > For Sale / Wanted > Private Adverts > Wanted: Bits for 996

[diehard]

Does anyone know what bottom yoke will fit the 996? I've found a hairline crack around one of the bolts so gonna change (looks like over tightening).

Also, in case I find a complete set, what forks will also fit?

[skidlids]

Most of the 748 range (Not the 748E as bottom yoke is different), all 916, 996 and 998's
Early model 748s and the 916s used calipers with 40mm spacing of the mounting bolts, later 748s, 996s and 998s used calipers with a 65mm spaced mount, otherwise they are all pretty well interchangeable

[diehard]

Cheers Skidz, have managed to pick up a set of 916 forks with a good lower yoke attached (same ducati part numbers) so that should do the trick. Going to change out the bearings etc when I swap them over too so on with that.