Stainless Steel Clutch prings

Wadd · 22-Dec-2003, 18:18

Do Ducati Performance do a set of stainless steel clutch springs, I was looking at mine on my 998 and as ive got an open clutch cover the springs have started to go rusty.

I have seen some aftermaket ones for sale but Im worried that if I fit these and I susequently have a problem with the clutch it may invalidate the warranty.

If Ducati do them any idea how much for a set ?
wadd

Mark853 · 22-Dec-2003, 21:17

Hi wadd,

i asked jhp the oter day and Mark in the stores told me Ducati don't do them.

I am in the same boat as you with rusty springs.

A mate of mine is making a set for me in stainless.

have a good christmas

mark

KeefyB · 22-Dec-2003, 22:04

Casoli's do 'em for 25quid a set.

Red-leader · 22-Dec-2003, 23:47

And spares shack do also. I have them fitted and have had warranty work carried out with no probs

antonye · 23-Dec-2003, 09:20

Didn't Nelly (Cornerspeed) do these as well? I know he does the stainless wheel nuts, but I'm sure I remember him saying something about them.

[panto mode]
Maybe if we say his name three times he'll appear...

Nelly...

Nelly...

Nelly...

nelly · 23-Dec-2003, 09:29

Hello there...........:P
Yes, I did have some. I don't have any in at the moment though.
Stuart at Spareshack is my source for them though, so it may be easier to get them from him direct at the moment?

I can certainly vouch for them. Quality pieces of kit.

rcgbob44 · 23-Dec-2003, 10:56

Most of the usual aftermarket suppliers will do S/S springs for the big dukes.

here`s mine on the 998, I also had some S/S spring retaing caps made as well.

Lee1980 · 23-Dec-2003, 13:31

Where do you get your springs and caps from?

Is the red plate a slipper clutch or coloured pressure plate?

Is that a DP vented cover?

Sorry for all the questions

Thanks

Lee1980

REDTREV · 23-Dec-2003, 13:44

Wadd
Dp pressure plate £60 from local dealer
stainless springs and retaining bushes (c/w new sockethead screws) from casoli
came the next day and look top notch with at tecmoto half vent cover £96

Wadd · 23-Dec-2003, 20:38

Are the springs straight forward to fit ?

Wadd

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Dec-2003, 21:17	#2
Mark853 Registered Forum User Mille Posts: 131 Join Date: Jul 2003 Location: West Midlands Mood: The medication helps! Hi wadd, i asked jhp the oter day and Mark in the stores told me Ducati don't do them. I am in the same boat as you with rusty springs. A mate of mine is making a set for me in stainless. have a good christmas mark Reply

22-Dec-2003, 22:04	#3
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... Casoli's do 'em for 25quid a set. Reply

22-Dec-2003, 23:47	#4
Red-leader Registered Forum User 500SD Posts: 882 Join Date: Oct 2002 Location: Chertsey Mood: wobbly !!! And spares shack do also. I have them fitted and have had warranty work carried out with no probs Reply

23-Dec-2003, 13:31	#8
Lee1980 Registered Forum User Big Twin Bikes: Xdaivel Posts: 1,051 Join Date: Aug 2003 Location: Bristol Mood: Xdiavel..awesome!! Where do you get your springs and caps from? Is the red plate a slipper clutch or coloured pressure plate? Is that a DP vented cover? Sorry for all the questions Thanks Lee1980 Reply

23-Dec-2003, 13:44	#9
REDTREV Registered Forum User Posts: 21 Join Date: Nov 2003 Location: HEMSBY NORFOLK Mood: covered in horse poo Wadd Dp pressure plate £60 from local dealer stainless springs and retaining bushes (c/w new sockethead screws) from casoli came the next day and look top notch with at tecmoto half vent cover £96 Reply

23-Dec-2003, 20:38	#10
Wadd Registered Forum User Posts: 44 Join Date: Jun 2001 Location: Swindon, Wiltshire Are the springs straight forward to fit ? Wadd Reply