Race cans - do I need to change the chip? - Page 2

andyb · 24-Jan-2005, 10:41

A dyno is only the same as running your bike under load. Are they saying dont run your bike flat out?

I aggree about the termi lookalikes........the stickers are only £6

Walenut · 24-Jan-2005, 11:14

I just seem to remember reading it some where, might have even been on this sight.

Walenut · 24-Jan-2005, 11:15

site!

ath748 · 24-Jan-2005, 14:08

I changed my original pipes to 45mm Termi's on my 748S about 6 months ago. I bought a chip from JHP but never got it fitted. The bike runs so so so much smoother and in my opinion better than it did with the original cans on I never bothered to fit the chip. I will get it looked at when it gets it next service to get Nelly's opinion.

rockhopper · 24-Jan-2005, 14:38

There is an issue with certain types of dyno. When the operator shuts the throttle its possible to damage something in the engine. Cant remember what it damages or which type of dyno does it but a very reliable person told me about it!

All dyno runs i have seen have been till the rev limiter cuts in.

JPM · 24-Jan-2005, 14:53

Quote:

Originally posted by rcgbob44
Rattler
Just for your info an Ultimap set up for a 998 was recently quoted to me at £500+ .......................expensive!

That's for a testeretta based engine though, when you will need a complete ECU, not just a chip like on the older models

ducv2 · 24-Jan-2005, 16:27

If you run a 2 stroke with petroil mix on a dyno and allow the engine to slow down with the dyno roller (which takes some time), with the throttle shut, it will probably seize. Maybe this is the type of damage you have heard about?? Run my Duke quite a few times on a dyno, no worse than doing a track day.

RickyX · 25-Jan-2005, 16:51

Hogfisch,

U2U sent ref FIM Ultimap Chip.

R X

rockhopper · 25-Jan-2005, 17:01

Nope, it was deffo Duke and Dynojet related! Nelly, help me out mate!

antonye · 25-Jan-2005, 17:33

Ducati Performance chips are £27 inc VAT from a dealer, and take 5 minutes to fit.

Don't forget to order a replacement "DO NOT REMOVE" sticker and fit that too

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

24-Jan-2005, 10:41	#11
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! A dyno is only the same as running your bike under load. Are they saying dont run your bike flat out? I aggree about the termi lookalikes........the stickers are only £6 Reply

24-Jan-2005, 11:14	#12
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic I just seem to remember reading it some where, might have even been on this sight. Reply

24-Jan-2005, 11:15	#13
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic site! Reply

25-Jan-2005, 16:51	#18
RickyX Registered Forum User Big Twin Bikes: 916SPS Ratbike + 749R Shed Posts: 1,030 Join Date: Jun 2001 Location: West Sussex Mood: Ugly girls (749) are more dirty..... Hogfisch, U2U sent ref FIM Ultimap Chip. R X Reply

25-Jan-2005, 17:01	#19
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton Nope, it was deffo Duke and Dynojet related! Nelly, help me out mate! Reply

25-Jan-2005, 17:33	#20
antonye Administrator Webteam MotoGP God Bikes: 748S, HM1100S, V4SP, Was: DD-A #111 Posts: 13,088 Join Date: Feb 2002 Location: Back in Essex Mood: Passion Killer Ducati Performance chips are £27 inc VAT from a dealer, and take 5 minutes to fit. Don't forget to order a replacement "DO NOT REMOVE" sticker and fit that too Reply